Samsung S8500 Wave Signal Network Problem Solution Jumpers

Samsung S8500 Wave Signal Network Problem Solution Jumpers Here bellow is the Samsung hardware repair solution I9070i no signal, In the case described above her that there is no network / signal on Samsung S8500 Wave caused by his excess stress on the point that produced RF ICs By VCO, in his Normal Voltage which released 0,5V By VCO range – 1.34V, measuring results generated at the measuring point which you can see in the picture with the top yellow box marking is 4V,
Samsung S8500 Wave Signal Network Problem Solution Jumpers
it means the voltage that produced too large, causing damage to the signal Samsung S8500 Wave. Process Improvement In his Samsung S8500 Wave, Please do the replacement of the component in the given marking Yellow. ‘s only one 1 sample Causes and Many More causes damage Samsung S8500 Wave signal if the measurement result is the same as the picture above then please you to do the replacement the IC is given a yellow marking. thank you